LONDON SIDING CO.

Better Exteriors. A Stronger London.

Call Get Quote

Home / Strathroy / Fibre Cement and James Hardie Siding

Serving Strathroy, Ontario

Fibre Cement and James Hardie Siding Strathroy

The fibre cement and james hardie siding question in Strathroy is usually settled by what the housing stock here is made of.

  • Quality Workmanship
  • Local Experts
  • Built for Ontario Homes

Specifying for Strathroy conditions

What suits a wall in Strathroy:

  • Higher wind-rated vinyl or fibre cement on west elevations.
  • Standard vinyl acceptable on sheltered east and north walls.

Strathroy sits in the Highway 402 corridor between London and Sarnia, which is the route lake-effect squalls off Lake Huron take inland. Wind loading on west-facing walls is meaningfully higher here than in London, and it is a direct argument for correct panel lock engagement and tighter fastener spacing on the west elevation.

How fibre cement and james hardie siding is done properly

  • Boards are fastened, not hung. Fastening pattern and blind-nail versus face-nail is specified by the manufacturer and it is what the warranty is judged against.
  • Cut ends need sealing. Field cuts expose the core, and an unsealed end grain is the usual entry point for moisture in a fibre cement wall.

Where fibre cement and james hardie siding goes wrong

  • Boards run tight to a deck or roof line with no clearance, wicking water into the core.

Which Strathroy housing takes fibre cement and james hardie siding well

Late 1800s — The downtown core around Frank Street and Front Street. Victorian brick with wood gables, bargeboard and porch detail. Siding work is detail work — gable ends, soffit and fascia, rear additions.

1960s–1980s — The residential ring around the core. Bungalows and back-splits, mostly aluminum and early vinyl now due.

2000s onward — Newer subdivisions on the north and east edges. Builder stock with vinyl on three elevations. Wind-lift repair on the exposed west side is a recurring call here.

What drives the price in Strathroy

Fibre cement carries a meaningfully higher labour cost than vinyl — heavier boards, dust control, and per-board fastening rather than hung courses.

Strathroy is 35 km from the London base. About 30 minutes west of London along Highway 402. Travel affects scheduling, not the price, and either way it is stated before you book.

Frequently asked questions

Fibre Cement and James Hardie Siding in Strathroy

Is fibre cement siding worth the extra cost in Ontario?

It holds colour longer, will not deform in heat, and takes impact far better than vinyl. The tradeoff is installed cost and a harder repair when a board does get damaged.

Do you need a permit for fibre cement and james hardie siding in Strathroy?

Strathroy-Caradoc administers building permits for Strathroy and Mount Brydges together. Because the municipality covers both urban and rural areas, setback and spatial separation rules differ noticeably between a town lot and a country property on the same permit application.

What makes Strathroy different from London for this work?

Strathroy sits in the Highway 402 corridor between London and Sarnia, which is the route lake-effect squalls off Lake Huron take inland. Wind loading on west-facing walls is meaningfully higher here than in London, and it is a direct argument for correct panel lock engagement and tighter fastener spacing on the west elevation.

A written quote for Strathroy breaks out material, labour, trim and disposal separately, so the comparison against another contractor is a real one.

Local service. Written quotes. No obligation.